Series SA-100 (CLF) FREE Chlorine Series SA-100 (CLT) TOTAL Chlorine

SUPERIORTM Chlorine Residual Analyzer Series SA-100 Continuous Flow Measuring Cell Analyzer The SUPERIORTMModel SA-100 Chlorine Residual Analyzer uses a continuous flow measuring cell within a built-in flow regulator. The SA-100 is nearly maintenance free, using electrodes which are constantly cleaned by the continuous flow of water over the electrodes. The configuration of the SA-100 Chlorine Residual Analyzer requires cleaning and calibration only once every two to six months, depending on water quality. The Superior SA-100-CLF FREE Chlorine Residual Analyzer, for use with free chlorine, is unique in the fact that the electrodes are not membrane covered. Costly replacement and clogging of the membranes are eliminated. Yearly replacement of the main measuring probe at a low cost is recommended, leaving the SA-100-CLF easy and inexpensive to maintain. The Superior SA-100-CLT TOTAL Chlorine Residual Analyzer is also nearly maintenance-free, requiring simple replenishment of the electrolyte solution every 1 1/2 to 2 months, depending on the water quality, and yearly replacement of the membrane cap from the total chlorine electrode. FEATURES: The SUPERIOR Model SA-100 represents the most modern design technology coupled with the best materials available to create an outstanding, user-friendly piece of equipment. It is designed with user convenience as a primary concern. Continuous flow measuring cell Built-in flow regulator: 15-120 psi Wide supply voltage: 85-260 VAC, 50-60 Hz Loop Power: 4-20 mA 400 ohm maximum load Measuring ranges: 0-0.200.00 ppm (mg/L). Standard ranges are: 0-3/5/10 ppm (mg/L), with other ranges available. (Measuring ranges depend on the analyzed substances.) Resolution: 0.01 ppm (mg/L) Accuracy: BETTER than 1% Sample flow: 57 L/hr. Protection: NEMA 4 APPLICATION: The SUPERIOR SA-100 is designed for use in: Wastewater treatment Water Purification Chlorination Dechlorination Swimming Pools Cooling towers - air scrubbers Food & beverage processing Materials used in manufacturing the SUPERIOR Chlorine Residual Analyzer SA-100 have been carefully selected for their superior quality and performance in situations and conditions far more extreme than conditions to be encountered in actual use. SA-100-CLF Operation & Specifications | SA-100-CLT Operation & Specifications Warranty | Get a Quote [Back to Top]

---

Select Category Chlorinators Switchover Chlorinators Pressure Feed Chlorinators Sulfonators Switchover Sulfonators Ammoniators Switchover Ammoniators Chlorine Residual Analyzers Waterguard Analyzers Autovalve VacuFeed Assemblies Accessories Sizing Guide Nozzle Charts Technical Bulletins Parts Lists Warranty

Chemical Injection Technologies, Inc.
4796 South US 1
Fort Pierce, FL 34982
Phone: 772-461-0666
Fax: 772-460-1847
superior@chlorinators.com

ont>

Home | Products | Applications | Warranty | Company | News | Contact